 |
|
Hopper Lifting
Type Mixing Machine Usage:
The HLT hopper lifting type mixer is extensively used for the mixing of
powder with powder or powder with grain in the process of diversified
solid preparation production in the pharmaceutical industry. This mixer
can be equipped with hoppers of various specifications, i.e. 600L to 1400L.
It is suitable for mixing pharmaceuticals of multiple varieties and different
batches according to the technological requirements in large and medium-sized
pharmaceutical enterprises, so it can achieve multiple purposes in one
machine.
Hopper Lifting
Type Mixing Machine Working principle:
After the charged hopper is tightly clamped by a rotating arm, it is lifted
to a certain position,and the arm begins to rotate at a speed below 50%
of the critical speed according to the preset technological parameters.
As the symmetrical axes of hopper and the rotating center line of rotating
arm form an included angle, materials with different constiuents are strenuously
rolling over in the closed hopper and producing high shear to achieve
the best effect of mixing.
|
|
Hopper Lifting
Type Mixing Machine Features:
It is a high-tech product which integrates machinery, electronics and
hydraulics into one body. It employs hydraulic clamping, lifting and driving,
and computer control, and is easy to operate, convenient to adjust technological
parameters.
The control system is highly sensitive, and the whole machine is compact
in structure, stable and reliable in running.
A single machine can be equipped with hoppers of various specifications
such as 600L, 800L,1000L, 1200L and 1400L. The materials after mixing
remains in the hopper, which will be dismounted from the rotating arm
and shifted directly to the next procedure, thus greatly improving the
utilization efficiency of the mixer and also avoiding cross contamination
of materials.
The mixing barrel can be used as a batching barrel in the previous procedure
and as a charging hopper in the next procedure (compressing and filling
of tablets).
The evenness of mixing reaches above 99%,the volume charge coefficient
reaches 0.80,both inner and outer surfaces of the barrel are clean and
smooth, and there is no dead corner.
The hydraulic,power and control systems, body frame and drive unit are
installed in the general production zone, only the rotating arm and the
hopper are installed in the clean zone,both are strictly isolated and
which fully conforms to the requirement of GMP
After the mixing of each batch of pharmaceuticals,the empty hopper is
sent to a special cleaning room for cleaning, so that the workshop can
keep a clean environment. |
