| |
|
|
 |
|
Corrugated Board Production Line Single Facer
DMWL-A Single Facer DW-B Single Facer
Two types of machines:
finger and fingerless single facer
The corrugating roll
is made by special alloy steel with quenching treatment. Its hardness can
reach HRC60±3.
For the finger single
facer, the lifting and lowering of the glue roll is controlled by handwheel
to avoid damaging the glue roll and finger.
For the fingerless single
facer, the lifting and lowering of the glue roll is hydraulically operated.
Reset is quickly and accurately.
The flute formation and
application are also pneumatically operated, with high-speed response and
producing a cushioning effect.
Auto-recirculating glue
in-feeding system.
Maximum working speed
is 80m/min.
Available width: 1400mm,
1600mm, 1800mm.
|
| |
|
|
 |
|
DW-B
Single Facer
Fingerless suction leading
edge feeding system.
The running condition
of the transmission parts is improved with single driving box, sealed gear
driving, oil bathed lubrication system and separate dynamics oscillating.
The adhesive application
is electrically adjusted with digital readout system.
Auto-recirculaing glue
in-feeding system.
The reset and return
of the glue roll, the formation of the flute and the application of paper
are all pneumatically operated.
The corrugating roll
is made by special alloy steel with quenching treatment. Its hardness can
reach HRC60±3.
Maximum working speed
is 150m/min.
Available width: 1400mm-2500mm
|
| |
|
|
 |
|
DWF
Single Facer
This machine is of parted
structure and the main working roll is half mounted. It is easy to maintain
and clean the equipment, easy to assemble and change the roll.
Finglerless suction feeding
system.
The running condition
of the gears is improved with single driving box, sealed gear driving, oil
bathed lubrication system and separate dynamics oscillating.
The synchronization of
forming unit and glue unit is realized through electronic shaft.
The machine is electrically
opened and closed with pneumatic locking connecting.
Auto-recirculating glue
supplying system and electric adjustment of adhesive application with digital
readout system are offered.
The reset of the glue
roll, the formation of the flute and the application of paper are all pneumatically
operated.
The corrugating roll
(f405mm) is made by special alloy steel with quenching treatment. Its hardness
can reach HRC60±3.
Maximum producing speed
is 180m/min.
Available width: 1400mm-2500mm
|
| |
|
|
 |
|
DWZ
Single Facer
It takes only 20 minutes
for corrugating roll change, ease of flute change and maintenance.
The positive air pressure
suction feeding system makes high strength adhesion for quality flute formation.
The running condition
of the gears is improved with single driving box, sealed gear driving, oil
bathed lubrication system and separate dynamics oscillating.
The synchronization of
forming unit and glue unit is realized through electronic shaft.
When changing the corrugating
roll, the machine can automatically butt steam pipes and power devices.
Auto-recirculating glue
in-feeding system and electric adjustment of adhesive application with digital
readout system are offered.
The reset of the glue
roll, the formation of the flute and the application of paper are all hydraulically
operated.
The corrugating roll
(f360mm) is made by special alloy steel with quenching treatment. Its hardness
can reach HRC60±3.
Maximum producing speed
is 200m/min.
Available width: 1600mm-2800mm.
|
|
